Reducer (Gear Box) in Hot Sale

Product Description

Product Description

ATA Series Shaft mounted Gearbox Reducer      SMR Series Shaft mounted Gearbox Reducer

ATA series shaft mounted gearbox(speed reducer) with helical hardened gears has the characteristics of high carrying capacity, smooth transmission, light weight, low energy consumption and so on. Input shaft of ATA speed reducer is connected with gear motor by belt pulley, hollow output shaft is linked with a key. It can be replaced by electric drum as power for belt conveyors and lifting equipments. ATA series shaft mounted gearbox could be attached with back-stop to avoid the working machine back skating, and conveniently mounted by tie rod. ATA series shaft mounted speed reducer is widely applied in the mining equipments, concrete mixing batching plant, stone crushers, sand making production line and other belt conveyors, mechanical transmission areas.

Mechanical belt conveyors drive system is composed of ATA shaft mounted speed reducer, torque arm, pulleys and gear motors, whose power transmission from the gear motor to the gearbox through the pulley, and then speed reducer passed to the drive pulley through the hollow output shaft and the gearbox is fixed by torque arm, anti-slip device can be configured. The system is convenient to install,use and maintain.



Features
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select three hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It's very convenient to be mounted.

Application

Stone crushers plant , Cement plant, Concrete batch mixing plant, Mining conveyors, Port transfer

conveyor, Crushing machine, etc ···

 

Characteristic

1) All gears are heat treated and fixed to achieve low noise and high output
2) Mounting dimensions are interchangeable with Fenner

Product Parameters

TA Shaft Mounted Reducer	Output Shaft Bore  [mm]	Ratio(i)	Rated torque
TA30	Φ30	7, 10, 12.5	180N.m
TA35	Φ35	5,10,15,20,25	420N.m
TA40	Φ40	5,10,12.5,15,20,25	900N.m
	Φ45
TA45	Φ45	5,10,12.5,15,20,25	1400N.m
	Φ50
	Φ55
TA50	Φ50	5,10,12.5,15,20,25	2300N.m
	Φ55
	Φ60
TA60	Φ60	5,10,12.5,15,20,25	3600N.m
	Φ70
TA70	Φ70	5,10,12.5,15,20,25,31	5100N.m
	Φ85
TA80	Φ80	5,10,12.5,15,20,25,31	7000N.m
	Φ100
TA100	Φ100	5,10,12.5,15,20,25,31	11000N.m

 

SMR  Model No.	Output Shaft Bore [mm]		Ratio(i)
	Standard	Alternative	5:1 13:1 20:1
B	Φ30	Φ40
C	Φ40	Φ50
D	Φ50	Φ55
E	Φ55	Φ65
F	Φ65	Φ75
G	Φ75	Φ85
H	Φ85	Φ100
J	Φ100	Φ120

 

Production Process